
Furnace & HVAC maintenance
Start fresh with a new filter, then keep a simple rhythm so the big bills never show up.
Change the furnace filter
Nobody knows when it was last done. Note the filter size, write the date on the edge of the new one, and set a reminder for the interval the filter and your furnace manual call for. The arrow on the filter frame points toward the furnace.
Read the size off the edge of the old filter (something like 16x25x1) and buy a multipack of pleated filters in that exact size (affiliate link, opens Amazon in a new tab) so the next change is already sitting in the closet. A mid-range MERV rating is the usual sweet spot: very high-MERV filters restrict airflow, and some systems don't like that, check what your furnace manual recommends before going higher. If the return is somewhere you'll forget about, a couple of filter-change reminder magnets (affiliate link, opens Amazon in a new tab) on the furnace cabinet do the job a phone reminder usually doesn't.
Heads up: match the size printed on the old filter exactly, and shut the furnace off at the switch before you open the cabinet. Anything past the filter door, gas, wiring, the blower, belongs to a licensed pro. If you have a heat pump, don't cover the outdoor unit for winter; it runs year-round, and a wrapped unit can be damaged.
Type the size printed along the cardboard edge of the old filter. Example: 16x25x1. Nothing you type here is saved or sent anywhere.
MERV 8 is only a common starting point, not the right answer for every system, check what your furnace manual recommends, since a higher MERV can restrict airflow. Also note filters are sold by nominal size, so the actual measurements may run slightly under the printed number.
Changing the filter, start to finish
Ninety seconds, including the part most people get wrong, which way the arrow faces.
Start a maintenance rhythm
Small habits prevent the five-figure surprises. Weekly, monthly, quarterly, and yearly lists are below, tick them off here or print the whole thing.
Tick these off right here, nothing is saved or sent anywhere. Anything involving gas, the electrical panel, the roof, or a chimney is worth handing to a licensed pro. If you ever smell gas, leave first and call from outside.
Weekly
Five minutes, tops.
Monthly
Coffee-in-hand laps around the house.
Quarterly
Seasonal reset.
Yearly
Some of these are pro jobs. Hiring out beats a hospital visit.
Furnace filter & service schedule
Print it, tape it inside the furnace closet door, and write the date every time you change the filter. Change intervals depend on the filter and your household — follow the interval printed on the filter and in your furnace manual. Thin 1-inch filters generally need changing far more often than thick media filters. Book the yearly service in early fall.
- Filter size
- Furnace make / model
- HVAC company & phone
| Month | Filter changed (date) | Notes |
|---|---|---|
| January | ||
| February | ||
| March | ||
| April | ||
| May | ||
| June | ||
| July | ||
| August | ||
| Septemberannual service | ||
| Octoberannual service | ||
| November | ||
| December |
Yearly furnace service: schedule a tune-up before the first cold snap. Ask them to check the heat exchanger, flame sensor, blower, and thermostat calibration — and to look at the AC in spring while they're out.
